Ran autoreconf to update config.guess and other configure files.

bindings/cpp/INSTALL

@@ -1,16 +1,25 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-Software Foundation, Inc.
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
 
-This file is free documentation; the Free Software Foundation gives
+   Copying and distribution of this file, with or without modification,
-unlimited permission to copy, distribute and modify it.
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
 
 Basic Installation
 ==================
 
-These are generic installation instructions.
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -23,9 +32,9 @@ debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -35,30 +44,37 @@ some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
+`configure' by a program called `autoconf'.  You need `configure.ac' if
-`configure.ac' if you want to change it or regenerate `configure' using
+you want to change it or regenerate `configure' using a newer version
-a newer version of `autoconf'.
+of `autoconf'.
 
-The simplest way to compile this package is:
+   The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
+     `./configure' to configure the package for your system.
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
 
-     Running `configure' takes awhile.  While running, it prints some
+     Running `configure' might take a while.  While running, it prints
-     messages telling which features it is checking for.
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
   3. Optionally, type `make check' to run any self-tests that come with
-     the package.
+     the package, generally using the just-built uninstalled binaries.
 
   4. Type `make install' to install the programs and any data files and
-     documentation.
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
 
-  5. You can remove the program binaries and object files from the
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
      files that `configure' created (so you can compile the package for
      a different kind of computer), type `make distclean'.  There is
@@ -67,45 +83,69 @@ The simplest way to compile this package is:
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that the
+   Some systems require unusual options for compilation or linking that
-`configure' script does not know about.  Run `./configure --help' for
+the `configure' script does not know about.  Run `./configure --help'
-details on some of the pertinent environment variables.
+for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
+own directory.  To do this, you can use GNU `make'.  `cd' to the
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
 
-   If you have to use a `make' that does not support the `VPATH'
+   With a non-GNU `make', it is safer to compile the package for one
-variable, you have to compile the package for one architecture at a
+architecture at a time in the source code directory.  After you have
-time in the source code directory.  After you have installed the
+installed the package for one architecture, use `make distclean' before
-package for one architecture, use `make distclean' before reconfiguring
+reconfiguring for another architecture.
-for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-By default, `make install' installs the package's commands under
+   By default, `make install' installs the package's commands under
 `/usr/local/bin', include files under `/usr/local/include', etc.  You
 can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
@@ -116,16 +156,47 @@ Documentation and other data files still use the regular prefix.
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
 
    If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
-Optional Features
+   Some packages pay attention to `--enable-FEATURE' options to
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,14 +208,53 @@ find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
 Specifying the System Type
 ==========================
 
-There may be some features `configure' cannot figure out automatically,
+   There may be some features `configure' cannot figure out
-but needs to determine by the type of machine the package will run on.
+automatically, but needs to determine by the type of machine the package
-Usually, assuming the package is built to be run on the _same_
+will run on.  Usually, assuming the package is built to be run on the
-architectures, `configure' can figure that out, but if it prints a
+_same_ architectures, `configure' can figure that out, but if it prints
-message saying it cannot guess the machine type, give it the
+a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -152,7 +262,8 @@ type, such as `sun4', or a canonical name which has the form:
 
 where SYSTEM can have one of these forms:
 
-     OS KERNEL-OS
+     OS
+     KERNEL-OS
 
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
@@ -170,9 +281,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
+   If you want to set default values for `configure' scripts to share,
-can create a site shell script called `config.site' that gives default
+you can create a site shell script called `config.site' that gives
-values for variables like `CC', `cache_file', and `prefix'.
+default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -181,7 +292,7 @@ A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 
-Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -190,21 +301,29 @@ them in the `configure' command line, using `VAR=value'.  For example:
      ./configure CC=/usr/local2/bin/gcc
 
 causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).  Here is a another example:
+overridden in the site shell script).
 
-     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
 
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-configuration-related scripts to be executed by `/bin/bash'.
 
 `configure' Invocation
 ======================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--help'
 `-h'
-     Print a summary of the options to `configure', and exit.
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
 
 `--version'
 `-V'
@@ -231,6 +350,16 @@ configuration-related scripts to be executed by `/bin/bash'.
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.
 

bindings/cpp/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +15,12 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -36,38 +34,59 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+subdir = .
 DIST_COMMON = README $(am__configure_deps) \
 	$(srcdir)/../../config.guess $(srcdir)/../../config.sub \
 	$(srcdir)/../../install-sh $(srcdir)/../../ltmain.sh \
 	$(srcdir)/../../missing $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/portaudiocpp.pc.in \
 	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES = portaudiocpp.pc
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
+	install-dvi-recursive install-exec-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
+	install-html-recursive install-info-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
-	uninstall-recursive
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -75,16 +94,39 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
+  { test ! -d "$(distdir)" \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AS = @AS@
@@ -106,52 +148,60 @@ DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
+FGREP = @FGREP@
-FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PORTAUDIO_ROOT = @PORTAUDIO_ROOT@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -163,6 +213,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -181,6 +232,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -190,8 +242,12 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 SUBDIRS = lib include bin 
 #doc
 EXTRA_DIST = portaudiocpp.pc
@@ -206,15 +262,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-	cd $(top_srcdir) && \
+	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
+	  $(AUTOMAKE) --gnu Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -230,9 +286,10 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 portaudiocpp.pc: $(top_builddir)/config.status $(srcdir)/portaudiocpp.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 
@@ -243,25 +300,27 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 distclean-libtool:
-	-rm -f libtool
+	-rm -f libtool config.lt
-uninstall-info-am:
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
+	  echo "$$d$$p"; \
-	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	done | $(am__base_list) | \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	  f=$(am__strip_dir) \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	test -n "$$files" || exit 0; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
-	done
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -270,7 +329,7 @@ uninstall-pkgconfigDATA:
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
 $(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
+	@fail= failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
 	    *=* | --[!k]*);; \
@@ -287,16 +346,15 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-mostlyclean-recursive clean-recursive distclean-recursive \
+$(RECURSIVE_CLEAN_TARGETS):
-maintainer-clean-recursive:
+	@fail= failcom='exit 1'; \
-	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
 	    *=* | --[!k]*);; \
@@ -322,16 +380,16 @@ maintainer-clean-recursive:
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -339,14 +397,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -358,93 +416,114 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	  if test $$# -gt 0; then \
-	    $$tags $$unique; \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
+	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
-	$(mkdir_p) $(distdir)/. $(distdir)/../..
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; \
-	list='$(DISTFILES)'; for file in $$list; do \
+	  dist_files=`for file in $$list; do echo $$file; done | \
-	  case $$file in \
+	  sed -e "s|^$$srcdirstrip/||;t" \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	case $$dist_files in \
-	  esac; \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	  fi; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	done
-	    (cd $$subdir && \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
+	        top_distdir="$$new_top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
 	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
@@ -453,6 +532,14 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -476,13 +563,17 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
@@ -490,9 +581,11 @@ distcheck: dist
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -514,13 +607,15 @@ distcheck: dist
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -543,7 +638,7 @@ all-am: Makefile $(DATA)
 installdirs: installdirs-recursive
 installdirs-am:
 	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
 install-exec: install-exec-recursive
@@ -565,6 +660,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -585,18 +681,38 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
 
 install-data-am: install-pkgconfigDATA
 
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-recursive
+
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -617,26 +733,29 @@ ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-pkgconfigDATA
+uninstall-am: uninstall-pkgconfigDATA
 
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	check-am clean clean-generic clean-libtool clean-recursive \
+	all all-am am--refresh check check-am clean clean-generic \
-	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-shar dist-tarZ dist-zip distcheck distclean \
+	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
-	distclean-generic distclean-libtool distclean-recursive \
+	distcheck distclean distclean-generic distclean-libtool \
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
+	install-data install-data-am install-dvi install-dvi-am \
-	install-info install-info-am install-man install-pkgconfigDATA \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
 	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+	ps ps-am tags tags-recursive uninstall uninstall-am \
-	tags tags-recursive uninstall uninstall-am uninstall-info-am \
 	uninstall-pkgconfigDATA
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

bindings/cpp/bin/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +15,12 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -45,33 +43,36 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 PROGRAMS = $(noinst_PROGRAMS)
 am_devs_OBJECTS = devs.$(OBJEXT)
 devs_OBJECTS = $(am_devs_OBJECTS)
 devs_LDADD = $(LDADD)
-devs_DEPENDENCIES = $(LIBDIR)/libportaudiocpp.la
+devs_DEPENDENCIES = $(LIBDIR)/libportaudiocpp.la \
+	$(top_builddir)/$(PORTAUDIO_ROOT)/lib/libportaudio.la
 am_sine_OBJECTS = sine.$(OBJEXT)
 sine_OBJECTS = $(am_sine_OBJECTS)
 sine_LDADD = $(LDADD)
-sine_DEPENDENCIES = $(LIBDIR)/libportaudiocpp.la
+sine_DEPENDENCIES = $(LIBDIR)/libportaudiocpp.la \
+	$(top_builddir)/$(PORTAUDIO_ROOT)/lib/libportaudio.la
 depcomp = $(SHELL) $(top_srcdir)/../../depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(devs_SOURCES) $(sine_SOURCES)
 DIST_SOURCES = $(devs_SOURCES) $(sine_SOURCES)
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AS = @AS@
@@ -93,52 +94,60 @@ DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
+FGREP = @FGREP@
-FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PORTAUDIO_ROOT = @PORTAUDIO_ROOT@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -150,6 +159,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -168,6 +178,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -177,11 +188,15 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 BINDIR = $(top_srcdir)/example
 LIBDIR = $(top_builddir)/lib
-LDADD = $(LIBDIR)/libportaudiocpp.la
+LDADD = $(LIBDIR)/libportaudiocpp.la $(top_builddir)/$(PORTAUDIO_ROOT)/lib/libportaudio.la
 devs_SOURCES = $(BINDIR)/devs.cxx
 sine_SOURCES = $(BINDIR)/sine.cxx
 all: all-am
@@ -192,14 +207,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-		&& exit 0; \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  bin/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bin/Makefile'; \
-	cd $(top_srcdir) && \
+	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  bin/Makefile
+	  $(AUTOMAKE) --gnu bin/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -217,19 +232,22 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
-	  echo " rm -f $$p $$f"; \
+	rm -f $$list || exit $$?; \
-	  rm -f $$p $$f ; \
+	test -n "$(EXEEXT)" || exit 0; \
-	done
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 devs$(EXEEXT): $(devs_OBJECTS) $(devs_DEPENDENCIES) 
 	@rm -f devs$(EXEEXT)
-	$(CXXLINK) $(devs_LDFLAGS) $(devs_OBJECTS) $(devs_LDADD) $(LIBS)
+	$(CXXLINK) $(devs_OBJECTS) $(devs_LDADD) $(LIBS)
 sine$(EXEEXT): $(sine_OBJECTS) $(sine_DEPENDENCIES) 
 	@rm -f sine$(EXEEXT)
-	$(CXXLINK) $(sine_LDFLAGS) $(sine_OBJECTS) $(sine_LDADD) $(LIBS)
+	$(CXXLINK) $(sine_OBJECTS) $(sine_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -241,50 +259,50 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sine.Po@am__quote@
 
 .cxx.o:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cxx.obj:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cxx.lo:
-@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
 
 devs.o: $(BINDIR)/devs.cxx
-@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT devs.o -MD -MP -MF "$(DEPDIR)/devs.Tpo" -c -o devs.o `test -f '$(BINDIR)/devs.cxx' || echo '$(srcdir)/'`$(BINDIR)/devs.cxx; \
+@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT devs.o -MD -MP -MF $(DEPDIR)/devs.Tpo -c -o devs.o `test -f '$(BINDIR)/devs.cxx' || echo '$(srcdir)/'`$(BINDIR)/devs.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/devs.Tpo" "$(DEPDIR)/devs.Po"; else rm -f "$(DEPDIR)/devs.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/devs.Tpo $(DEPDIR)/devs.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(BINDIR)/devs.cxx' object='devs.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o devs.o `test -f '$(BINDIR)/devs.cxx' || echo '$(srcdir)/'`$(BINDIR)/devs.cxx
 
 devs.obj: $(BINDIR)/devs.cxx
-@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT devs.obj -MD -MP -MF "$(DEPDIR)/devs.Tpo" -c -o devs.obj `if test -f '$(BINDIR)/devs.cxx'; then $(CYGPATH_W) '$(BINDIR)/devs.cxx'; else $(CYGPATH_W) '$(srcdir)/$(BINDIR)/devs.cxx'; fi`; \
+@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT devs.obj -MD -MP -MF $(DEPDIR)/devs.Tpo -c -o devs.obj `if test -f '$(BINDIR)/devs.cxx'; then $(CYGPATH_W) '$(BINDIR)/devs.cxx'; else $(CYGPATH_W) '$(srcdir)/$(BINDIR)/devs.cxx'; fi`
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/devs.Tpo" "$(DEPDIR)/devs.Po"; else rm -f "$(DEPDIR)/devs.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/devs.Tpo $(DEPDIR)/devs.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(BINDIR)/devs.cxx' object='devs.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o devs.obj `if test -f '$(BINDIR)/devs.cxx'; then $(CYGPATH_W) '$(BINDIR)/devs.cxx'; else $(CYGPATH_W) '$(srcdir)/$(BINDIR)/devs.cxx'; fi`
 
 sine.o: $(BINDIR)/sine.cxx
-@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sine.o -MD -MP -MF "$(DEPDIR)/sine.Tpo" -c -o sine.o `test -f '$(BINDIR)/sine.cxx' || echo '$(srcdir)/'`$(BINDIR)/sine.cxx; \
+@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sine.o -MD -MP -MF $(DEPDIR)/sine.Tpo -c -o sine.o `test -f '$(BINDIR)/sine.cxx' || echo '$(srcdir)/'`$(BINDIR)/sine.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/sine.Tpo" "$(DEPDIR)/sine.Po"; else rm -f "$(DEPDIR)/sine.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/sine.Tpo $(DEPDIR)/sine.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(BINDIR)/sine.cxx' object='sine.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sine.o `test -f '$(BINDIR)/sine.cxx' || echo '$(srcdir)/'`$(BINDIR)/sine.cxx
 
 sine.obj: $(BINDIR)/sine.cxx
-@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sine.obj -MD -MP -MF "$(DEPDIR)/sine.Tpo" -c -o sine.obj `if test -f '$(BINDIR)/sine.cxx'; then $(CYGPATH_W) '$(BINDIR)/sine.cxx'; else $(CYGPATH_W) '$(srcdir)/$(BINDIR)/sine.cxx'; fi`; \
+@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sine.obj -MD -MP -MF $(DEPDIR)/sine.Tpo -c -o sine.obj `if test -f '$(BINDIR)/sine.cxx'; then $(CYGPATH_W) '$(BINDIR)/sine.cxx'; else $(CYGPATH_W) '$(srcdir)/$(BINDIR)/sine.cxx'; fi`
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/sine.Tpo" "$(DEPDIR)/sine.Po"; else rm -f "$(DEPDIR)/sine.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/sine.Tpo $(DEPDIR)/sine.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(BINDIR)/sine.cxx' object='sine.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sine.obj `if test -f '$(BINDIR)/sine.cxx'; then $(CYGPATH_W) '$(BINDIR)/sine.cxx'; else $(CYGPATH_W) '$(srcdir)/$(BINDIR)/sine.cxx'; fi`
@@ -295,82 +313,85 @@ mostlyclean-libtool:
 clean-libtool:
 	-rm -rf .libs _libs
 
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	  if test $$# -gt 0; then \
-	    $$tags $$unique; \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
+	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
+	list='$(DISTFILES)'; \
-	  case $$file in \
+	  dist_files=`for file in $$list; do echo $$file; done | \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  sed -e "s|^$$srcdirstrip/||;t" \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	  esac; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -398,6 +419,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -411,7 +433,7 @@ distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
+	distclean-tags
 
 dvi: dvi-am
 
@@ -419,18 +441,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am:
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -451,19 +493,23 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am
+uninstall-am:
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libtool clean-noinstPROGRAMS ctags distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
+	install install-am install-data install-data-am install-dvi \
-	install-exec-am install-info install-info-am install-man \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
 	maintainer-clean maintainer-clean-generic mostlyclean \
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
+	pdf pdf-am ps ps-am tags uninstall uninstall-am
-	uninstall-info-am
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

bindings/cpp/doc/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,15 +14,12 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -43,12 +41,11 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AS = @AS@
@@ -70,52 +67,60 @@ DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
+FGREP = @FGREP@
-FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PORTAUDIO_ROOT = @PORTAUDIO_ROOT@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -127,6 +132,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -145,6 +151,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -154,8 +161,12 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 PACPP_ROOT = .
 all: all-am
 
@@ -164,14 +175,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-		&& exit 0; \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-	cd $(top_srcdir) && \
+	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/Makefile
+	  $(AUTOMAKE) --gnu doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -189,16 +200,13 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
 
 clean-libtool:
 	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
 tags: TAGS
 TAGS:
 
@@ -207,29 +215,32 @@ CTAGS:
 
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
+	list='$(DISTFILES)'; \
-	  case $$file in \
+	  dist_files=`for file in $$list; do echo $$file; done | \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  sed -e "s|^$$srcdirstrip/||;t" \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	  esac; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -257,6 +268,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -267,7 +279,7 @@ clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-am
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
 
 dvi: dvi-am
 
@@ -275,18 +287,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am:
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -305,22 +337,26 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am
+uninstall-am:
+
+.MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 	distclean distclean-generic distclean-libtool distdir dvi \
 	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
+	install-data install-data-am install-dvi install-dvi-am \
-	install-info install-info-am install-man install-strip \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
 	installcheck installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
-	uninstall-info-am
 
 #INCLUDES = -I$(srcdir)/$(PACPP_ROOT)/include -I$(top_srcdir)/include
 
 docs:
 	doxygen $(srcdir)/config.doxy.linux
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

bindings/cpp/include/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +15,12 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -45,6 +43,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -52,16 +51,28 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(pkgincludedir)"
-pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(pkginclude_HEADERS)
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AS = @AS@
@@ -83,52 +94,60 @@ DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
+FGREP = @FGREP@
-FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PORTAUDIO_ROOT = @PORTAUDIO_ROOT@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -140,6 +159,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -158,6 +178,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -167,8 +188,12 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 pkginclude_HEADERS = \
        portaudiocpp/AutoSystem.hxx \
        portaudiocpp/BlockingStream.hxx \
@@ -197,14 +222,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-		&& exit 0; \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  include/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \
-	cd $(top_srcdir) && \
+	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  include/Makefile
+	  $(AUTOMAKE) --gnu include/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -222,107 +247,113 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
 
 clean-libtool:
 	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
 install-pkgincludeHEADERS: $(pkginclude_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgincludedir)" || $(mkdir_p) "$(DESTDIR)$(pkgincludedir)"
+	test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)"
-	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
+	  echo "$$d$$p"; \
-	  echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	done | $(am__base_list) | \
-	  $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
 	done
 
 uninstall-pkgincludeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
-	  f=$(am__strip_dir) \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	test -n "$$files" || exit 0; \
-	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \
-	done
+	cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	  if test $$# -gt 0; then \
-	    $$tags $$unique; \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
+	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	$(mkdir_p) $(distdir)/portaudiocpp
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; \
-	list='$(DISTFILES)'; for file in $$list; do \
+	  dist_files=`for file in $$list; do echo $$file; done | \
-	  case $$file in \
+	  sed -e "s|^$$srcdirstrip/||;t" \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	case $$dist_files in \
-	  esac; \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -331,7 +362,7 @@ check: check-am
 all-am: Makefile $(HEADERS)
 installdirs:
 	for dir in "$(DESTDIR)$(pkgincludedir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -353,6 +384,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -363,8 +395,7 @@ clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-am
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool \
+distclean-am: clean-am distclean-generic distclean-tags
-	distclean-tags
 
 dvi: dvi-am
 
@@ -372,18 +403,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-pkgincludeHEADERS
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -402,22 +453,26 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-pkgincludeHEADERS
+uninstall-am: uninstall-pkgincludeHEADERS
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libtool ctags distclean distclean-generic \
 	distclean-libtool distclean-tags distdir dvi dvi-am html \
 	html-am info info-am install install-am install-data \
-	install-data-am install-exec install-exec-am install-info \
+	install-data-am install-dvi install-dvi-am install-exec \
-	install-info-am install-man install-pkgincludeHEADERS \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-pkgincludeHEADERS install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
 	maintainer-clean maintainer-clean-generic mostlyclean \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-info-am \
+	tags uninstall uninstall-am uninstall-pkgincludeHEADERS
-	uninstall-pkgincludeHEADERS
 
 
 #       portaudiocpp/AsioDeviceAdapter.hxx
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

bindings/cpp/lib/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +15,12 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -44,14 +42,29 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libportaudiocpp_la_DEPENDENCIES =  \
 	$(top_builddir)/$(PORTAUDIO_ROOT)/lib/libportaudio.la
@@ -63,24 +76,27 @@ am_libportaudiocpp_la_OBJECTS = BlockingStream.lo CallbackInterface.lo \
 	StreamParameters.lo System.lo SystemDeviceIterator.lo \
 	SystemHostApiIterator.lo
 libportaudiocpp_la_OBJECTS = $(am_libportaudiocpp_la_OBJECTS)
+libportaudiocpp_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(libportaudiocpp_la_LDFLAGS) $(LDFLAGS) -o $@
 depcomp = $(SHELL) $(top_srcdir)/../../depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(libportaudiocpp_la_SOURCES)
 DIST_SOURCES = $(libportaudiocpp_la_SOURCES)
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AS = @AS@
@@ -102,52 +118,60 @@ DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
+FGREP = @FGREP@
-FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_VERSION_INFO = @LT_VERSION_INFO@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PORTAUDIO_ROOT = @PORTAUDIO_ROOT@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -159,6 +183,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -177,6 +202,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -186,8 +212,12 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 SRCDIR = $(top_srcdir)/source/portaudiocpp
 lib_LTLIBRARIES = libportaudiocpp.la
 LDADD = libportaudiocpp.la
@@ -219,14 +249,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-		&& exit 0; \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  lib/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
-	cd $(top_srcdir) && \
+	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  lib/Makefile
+	  $(AUTOMAKE) --gnu lib/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -244,23 +274,28 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
+	    list2="$$list2 $$p"; \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	  p=$(am__strip_dir) \
+	for p in $$list; do \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(am__strip_dir) \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -272,7 +307,7 @@ clean-libLTLIBRARIES:
 	  rm -f "$${dir}/so_locations"; \
 	done
 libportaudiocpp.la: $(libportaudiocpp_la_OBJECTS) $(libportaudiocpp_la_DEPENDENCIES) 
-	$(CXXLINK) -rpath $(libdir) $(libportaudiocpp_la_LDFLAGS) $(libportaudiocpp_la_OBJECTS) $(libportaudiocpp_la_LIBADD) $(LIBS)
+	$(libportaudiocpp_la_LINK) -rpath $(libdir) $(libportaudiocpp_la_OBJECTS) $(libportaudiocpp_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -298,137 +333,137 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SystemHostApiIterator.Plo@am__quote@
 
 .cxx.o:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cxx.obj:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cxx.lo:
-@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
 
 BlockingStream.lo: $(SRCDIR)/BlockingStream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT BlockingStream.lo -MD -MP -MF "$(DEPDIR)/BlockingStream.Tpo" -c -o BlockingStream.lo `test -f '$(SRCDIR)/BlockingStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/BlockingStream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT BlockingStream.lo -MD -MP -MF $(DEPDIR)/BlockingStream.Tpo -c -o BlockingStream.lo `test -f '$(SRCDIR)/BlockingStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/BlockingStream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/BlockingStream.Tpo" "$(DEPDIR)/BlockingStream.Plo"; else rm -f "$(DEPDIR)/BlockingStream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/BlockingStream.Tpo $(DEPDIR)/BlockingStream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/BlockingStream.cxx' object='BlockingStream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o BlockingStream.lo `test -f '$(SRCDIR)/BlockingStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/BlockingStream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o BlockingStream.lo `test -f '$(SRCDIR)/BlockingStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/BlockingStream.cxx
 
 CallbackInterface.lo: $(SRCDIR)/CallbackInterface.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CallbackInterface.lo -MD -MP -MF "$(DEPDIR)/CallbackInterface.Tpo" -c -o CallbackInterface.lo `test -f '$(SRCDIR)/CallbackInterface.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackInterface.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CallbackInterface.lo -MD -MP -MF $(DEPDIR)/CallbackInterface.Tpo -c -o CallbackInterface.lo `test -f '$(SRCDIR)/CallbackInterface.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackInterface.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/CallbackInterface.Tpo" "$(DEPDIR)/CallbackInterface.Plo"; else rm -f "$(DEPDIR)/CallbackInterface.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/CallbackInterface.Tpo $(DEPDIR)/CallbackInterface.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/CallbackInterface.cxx' object='CallbackInterface.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CallbackInterface.lo `test -f '$(SRCDIR)/CallbackInterface.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackInterface.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CallbackInterface.lo `test -f '$(SRCDIR)/CallbackInterface.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackInterface.cxx
 
 CallbackStream.lo: $(SRCDIR)/CallbackStream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CallbackStream.lo -MD -MP -MF "$(DEPDIR)/CallbackStream.Tpo" -c -o CallbackStream.lo `test -f '$(SRCDIR)/CallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackStream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CallbackStream.lo -MD -MP -MF $(DEPDIR)/CallbackStream.Tpo -c -o CallbackStream.lo `test -f '$(SRCDIR)/CallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackStream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/CallbackStream.Tpo" "$(DEPDIR)/CallbackStream.Plo"; else rm -f "$(DEPDIR)/CallbackStream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/CallbackStream.Tpo $(DEPDIR)/CallbackStream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/CallbackStream.cxx' object='CallbackStream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CallbackStream.lo `test -f '$(SRCDIR)/CallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackStream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CallbackStream.lo `test -f '$(SRCDIR)/CallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CallbackStream.cxx
 
 CFunCallbackStream.lo: $(SRCDIR)/CFunCallbackStream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CFunCallbackStream.lo -MD -MP -MF "$(DEPDIR)/CFunCallbackStream.Tpo" -c -o CFunCallbackStream.lo `test -f '$(SRCDIR)/CFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CFunCallbackStream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CFunCallbackStream.lo -MD -MP -MF $(DEPDIR)/CFunCallbackStream.Tpo -c -o CFunCallbackStream.lo `test -f '$(SRCDIR)/CFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CFunCallbackStream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/CFunCallbackStream.Tpo" "$(DEPDIR)/CFunCallbackStream.Plo"; else rm -f "$(DEPDIR)/CFunCallbackStream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/CFunCallbackStream.Tpo $(DEPDIR)/CFunCallbackStream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/CFunCallbackStream.cxx' object='CFunCallbackStream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CFunCallbackStream.lo `test -f '$(SRCDIR)/CFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CFunCallbackStream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CFunCallbackStream.lo `test -f '$(SRCDIR)/CFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CFunCallbackStream.cxx
 
 CppFunCallbackStream.lo: $(SRCDIR)/CppFunCallbackStream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CppFunCallbackStream.lo -MD -MP -MF "$(DEPDIR)/CppFunCallbackStream.Tpo" -c -o CppFunCallbackStream.lo `test -f '$(SRCDIR)/CppFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CppFunCallbackStream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT CppFunCallbackStream.lo -MD -MP -MF $(DEPDIR)/CppFunCallbackStream.Tpo -c -o CppFunCallbackStream.lo `test -f '$(SRCDIR)/CppFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CppFunCallbackStream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/CppFunCallbackStream.Tpo" "$(DEPDIR)/CppFunCallbackStream.Plo"; else rm -f "$(DEPDIR)/CppFunCallbackStream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/CppFunCallbackStream.Tpo $(DEPDIR)/CppFunCallbackStream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/CppFunCallbackStream.cxx' object='CppFunCallbackStream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CppFunCallbackStream.lo `test -f '$(SRCDIR)/CppFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CppFunCallbackStream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o CppFunCallbackStream.lo `test -f '$(SRCDIR)/CppFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/CppFunCallbackStream.cxx
 
 Device.lo: $(SRCDIR)/Device.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT Device.lo -MD -MP -MF "$(DEPDIR)/Device.Tpo" -c -o Device.lo `test -f '$(SRCDIR)/Device.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Device.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT Device.lo -MD -MP -MF $(DEPDIR)/Device.Tpo -c -o Device.lo `test -f '$(SRCDIR)/Device.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Device.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/Device.Tpo" "$(DEPDIR)/Device.Plo"; else rm -f "$(DEPDIR)/Device.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/Device.Tpo $(DEPDIR)/Device.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/Device.cxx' object='Device.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o Device.lo `test -f '$(SRCDIR)/Device.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Device.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o Device.lo `test -f '$(SRCDIR)/Device.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Device.cxx
 
 DirectionSpecificStreamParameters.lo: $(SRCDIR)/DirectionSpecificStreamParameters.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT DirectionSpecificStreamParameters.lo -MD -MP -MF "$(DEPDIR)/DirectionSpecificStreamParameters.Tpo" -c -o DirectionSpecificStreamParameters.lo `test -f '$(SRCDIR)/DirectionSpecificStreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/DirectionSpecificStreamParameters.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT DirectionSpecificStreamParameters.lo -MD -MP -MF $(DEPDIR)/DirectionSpecificStreamParameters.Tpo -c -o DirectionSpecificStreamParameters.lo `test -f '$(SRCDIR)/DirectionSpecificStreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/DirectionSpecificStreamParameters.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/DirectionSpecificStreamParameters.Tpo" "$(DEPDIR)/DirectionSpecificStreamParameters.Plo"; else rm -f "$(DEPDIR)/DirectionSpecificStreamParameters.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/DirectionSpecificStreamParameters.Tpo $(DEPDIR)/DirectionSpecificStreamParameters.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/DirectionSpecificStreamParameters.cxx' object='DirectionSpecificStreamParameters.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o DirectionSpecificStreamParameters.lo `test -f '$(SRCDIR)/DirectionSpecificStreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/DirectionSpecificStreamParameters.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o DirectionSpecificStreamParameters.lo `test -f '$(SRCDIR)/DirectionSpecificStreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/DirectionSpecificStreamParameters.cxx
 
 Exception.lo: $(SRCDIR)/Exception.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT Exception.lo -MD -MP -MF "$(DEPDIR)/Exception.Tpo" -c -o Exception.lo `test -f '$(SRCDIR)/Exception.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Exception.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT Exception.lo -MD -MP -MF $(DEPDIR)/Exception.Tpo -c -o Exception.lo `test -f '$(SRCDIR)/Exception.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Exception.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/Exception.Tpo" "$(DEPDIR)/Exception.Plo"; else rm -f "$(DEPDIR)/Exception.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/Exception.Tpo $(DEPDIR)/Exception.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/Exception.cxx' object='Exception.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o Exception.lo `test -f '$(SRCDIR)/Exception.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Exception.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o Exception.lo `test -f '$(SRCDIR)/Exception.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Exception.cxx
 
 HostApi.lo: $(SRCDIR)/HostApi.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT HostApi.lo -MD -MP -MF "$(DEPDIR)/HostApi.Tpo" -c -o HostApi.lo `test -f '$(SRCDIR)/HostApi.cxx' || echo '$(srcdir)/'`$(SRCDIR)/HostApi.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT HostApi.lo -MD -MP -MF $(DEPDIR)/HostApi.Tpo -c -o HostApi.lo `test -f '$(SRCDIR)/HostApi.cxx' || echo '$(srcdir)/'`$(SRCDIR)/HostApi.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/HostApi.Tpo" "$(DEPDIR)/HostApi.Plo"; else rm -f "$(DEPDIR)/HostApi.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/HostApi.Tpo $(DEPDIR)/HostApi.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/HostApi.cxx' object='HostApi.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o HostApi.lo `test -f '$(SRCDIR)/HostApi.cxx' || echo '$(srcdir)/'`$(SRCDIR)/HostApi.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o HostApi.lo `test -f '$(SRCDIR)/HostApi.cxx' || echo '$(srcdir)/'`$(SRCDIR)/HostApi.cxx
 
 InterfaceCallbackStream.lo: $(SRCDIR)/InterfaceCallbackStream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT InterfaceCallbackStream.lo -MD -MP -MF "$(DEPDIR)/InterfaceCallbackStream.Tpo" -c -o InterfaceCallbackStream.lo `test -f '$(SRCDIR)/InterfaceCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/InterfaceCallbackStream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT InterfaceCallbackStream.lo -MD -MP -MF $(DEPDIR)/InterfaceCallbackStream.Tpo -c -o InterfaceCallbackStream.lo `test -f '$(SRCDIR)/InterfaceCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/InterfaceCallbackStream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/InterfaceCallbackStream.Tpo" "$(DEPDIR)/InterfaceCallbackStream.Plo"; else rm -f "$(DEPDIR)/InterfaceCallbackStream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/InterfaceCallbackStream.Tpo $(DEPDIR)/InterfaceCallbackStream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/InterfaceCallbackStream.cxx' object='InterfaceCallbackStream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o InterfaceCallbackStream.lo `test -f '$(SRCDIR)/InterfaceCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/InterfaceCallbackStream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o InterfaceCallbackStream.lo `test -f '$(SRCDIR)/InterfaceCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/InterfaceCallbackStream.cxx
 
 MemFunCallbackStream.lo: $(SRCDIR)/MemFunCallbackStream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT MemFunCallbackStream.lo -MD -MP -MF "$(DEPDIR)/MemFunCallbackStream.Tpo" -c -o MemFunCallbackStream.lo `test -f '$(SRCDIR)/MemFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/MemFunCallbackStream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT MemFunCallbackStream.lo -MD -MP -MF $(DEPDIR)/MemFunCallbackStream.Tpo -c -o MemFunCallbackStream.lo `test -f '$(SRCDIR)/MemFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/MemFunCallbackStream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/MemFunCallbackStream.Tpo" "$(DEPDIR)/MemFunCallbackStream.Plo"; else rm -f "$(DEPDIR)/MemFunCallbackStream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/MemFunCallbackStream.Tpo $(DEPDIR)/MemFunCallbackStream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/MemFunCallbackStream.cxx' object='MemFunCallbackStream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o MemFunCallbackStream.lo `test -f '$(SRCDIR)/MemFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/MemFunCallbackStream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o MemFunCallbackStream.lo `test -f '$(SRCDIR)/MemFunCallbackStream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/MemFunCallbackStream.cxx
 
 Stream.lo: $(SRCDIR)/Stream.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT Stream.lo -MD -MP -MF "$(DEPDIR)/Stream.Tpo" -c -o Stream.lo `test -f '$(SRCDIR)/Stream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Stream.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT Stream.lo -MD -MP -MF $(DEPDIR)/Stream.Tpo -c -o Stream.lo `test -f '$(SRCDIR)/Stream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Stream.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/Stream.Tpo" "$(DEPDIR)/Stream.Plo"; else rm -f "$(DEPDIR)/Stream.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/Stream.Tpo $(DEPDIR)/Stream.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/Stream.cxx' object='Stream.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o Stream.lo `test -f '$(SRCDIR)/Stream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Stream.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o Stream.lo `test -f '$(SRCDIR)/Stream.cxx' || echo '$(srcdir)/'`$(SRCDIR)/Stream.cxx
 
 StreamParameters.lo: $(SRCDIR)/StreamParameters.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT StreamParameters.lo -MD -MP -MF "$(DEPDIR)/StreamParameters.Tpo" -c -o StreamParameters.lo `test -f '$(SRCDIR)/StreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/StreamParameters.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT StreamParameters.lo -MD -MP -MF $(DEPDIR)/StreamParameters.Tpo -c -o StreamParameters.lo `test -f '$(SRCDIR)/StreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/StreamParameters.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/StreamParameters.Tpo" "$(DEPDIR)/StreamParameters.Plo"; else rm -f "$(DEPDIR)/StreamParameters.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/StreamParameters.Tpo $(DEPDIR)/StreamParameters.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/StreamParameters.cxx' object='StreamParameters.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o StreamParameters.lo `test -f '$(SRCDIR)/StreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/StreamParameters.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o StreamParameters.lo `test -f '$(SRCDIR)/StreamParameters.cxx' || echo '$(srcdir)/'`$(SRCDIR)/StreamParameters.cxx
 
 System.lo: $(SRCDIR)/System.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT System.lo -MD -MP -MF "$(DEPDIR)/System.Tpo" -c -o System.lo `test -f '$(SRCDIR)/System.cxx' || echo '$(srcdir)/'`$(SRCDIR)/System.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT System.lo -MD -MP -MF $(DEPDIR)/System.Tpo -c -o System.lo `test -f '$(SRCDIR)/System.cxx' || echo '$(srcdir)/'`$(SRCDIR)/System.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/System.Tpo" "$(DEPDIR)/System.Plo"; else rm -f "$(DEPDIR)/System.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/System.Tpo $(DEPDIR)/System.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/System.cxx' object='System.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o System.lo `test -f '$(SRCDIR)/System.cxx' || echo '$(srcdir)/'`$(SRCDIR)/System.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o System.lo `test -f '$(SRCDIR)/System.cxx' || echo '$(srcdir)/'`$(SRCDIR)/System.cxx
 
 SystemDeviceIterator.lo: $(SRCDIR)/SystemDeviceIterator.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT SystemDeviceIterator.lo -MD -MP -MF "$(DEPDIR)/SystemDeviceIterator.Tpo" -c -o SystemDeviceIterator.lo `test -f '$(SRCDIR)/SystemDeviceIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemDeviceIterator.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT SystemDeviceIterator.lo -MD -MP -MF $(DEPDIR)/SystemDeviceIterator.Tpo -c -o SystemDeviceIterator.lo `test -f '$(SRCDIR)/SystemDeviceIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemDeviceIterator.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/SystemDeviceIterator.Tpo" "$(DEPDIR)/SystemDeviceIterator.Plo"; else rm -f "$(DEPDIR)/SystemDeviceIterator.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/SystemDeviceIterator.Tpo $(DEPDIR)/SystemDeviceIterator.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/SystemDeviceIterator.cxx' object='SystemDeviceIterator.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o SystemDeviceIterator.lo `test -f '$(SRCDIR)/SystemDeviceIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemDeviceIterator.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o SystemDeviceIterator.lo `test -f '$(SRCDIR)/SystemDeviceIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemDeviceIterator.cxx
 
 SystemHostApiIterator.lo: $(SRCDIR)/SystemHostApiIterator.cxx
-@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT SystemHostApiIterator.lo -MD -MP -MF "$(DEPDIR)/SystemHostApiIterator.Tpo" -c -o SystemHostApiIterator.lo `test -f '$(SRCDIR)/SystemHostApiIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemHostApiIterator.cxx; \
+@am__fastdepCXX_TRUE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT SystemHostApiIterator.lo -MD -MP -MF $(DEPDIR)/SystemHostApiIterator.Tpo -c -o SystemHostApiIterator.lo `test -f '$(SRCDIR)/SystemHostApiIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemHostApiIterator.cxx
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/SystemHostApiIterator.Tpo" "$(DEPDIR)/SystemHostApiIterator.Plo"; else rm -f "$(DEPDIR)/SystemHostApiIterator.Tpo"; exit 1; fi
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/SystemHostApiIterator.Tpo $(DEPDIR)/SystemHostApiIterator.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$(SRCDIR)/SystemHostApiIterator.cxx' object='SystemHostApiIterator.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o SystemHostApiIterator.lo `test -f '$(SRCDIR)/SystemHostApiIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemHostApiIterator.cxx
+@am__fastdepCXX_FALSE@	$(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o SystemHostApiIterator.lo `test -f '$(SRCDIR)/SystemHostApiIterator.cxx' || echo '$(srcdir)/'`$(SRCDIR)/SystemHostApiIterator.cxx
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -436,82 +471,85 @@ mostlyclean-libtool:
 clean-libtool:
 	-rm -rf .libs _libs
 
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	  if test $$# -gt 0; then \
-	    $$tags $$unique; \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
+	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
+	list='$(DISTFILES)'; \
-	  case $$file in \
+	  dist_files=`for file in $$list; do echo $$file; done | \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  sed -e "s|^$$srcdirstrip/||;t" \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	  esac; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -520,7 +558,7 @@ check: check-am
 all-am: Makefile $(LTLIBRARIES)
 installdirs:
 	for dir in "$(DESTDIR)$(libdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -542,6 +580,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -555,7 +594,7 @@ distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
+	distclean-tags
 
 dvi: dvi-am
 
@@ -563,18 +602,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am:
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am: install-libLTLIBRARIES
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -595,20 +654,24 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libLTLIBRARIES clean-libtool ctags distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
+	install install-am install-data install-data-am install-dvi \
-	install-exec-am install-info install-info-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-libLTLIBRARIES install-man install-strip installcheck \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-info-am \
+	tags uninstall uninstall-am uninstall-libLTLIBRARIES
-	uninstall-libLTLIBRARIES
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.